In this section, we will discuss how to compute the excursion sets of
a random field. The excursion sets are the sets of points where the
random field exceeds a certain threshold. We will use the
excursions package in R to compute the excursion sets of a
random field.
Note that for large-scale problems, the computation of excursion sets can be computationally expensive. In such cases, it is advisable to use parallel computing or distributed computing to speed up the computation, and/or use CPU clusters with large memory.
# Load the required libraries
library(excursions)
library(ggplot2)
library(dplyr)
library(INLA)
library(scico)
library(MetricGraph)
library(qs)
# Function that takes the INLA object and returns the excursions object
compute_excursions <- function(spde_fit_inla, F_limit, alpha, type) {
start.time <- Sys.time()
test_exc <- excursions.inla(spde_fit_inla,
name = "field", u = 0, type = type,
method = "EB",
F.limit = F_limit,
alpha = alpha,
verbose = TRUE,
n.iter = 10000,
max.threads = 10
)
end.time <- Sys.time()
time.taken <- round(end.time - start.time, 2)
return(list(test_exc, time.taken))
}
load("Data/5Fit_model1_alpha1_exact_100m.RData")
### MODEL 1 ###
exc_model1_larger <- compute_excursions(spde_fit1_no_repl, 0.3, 0.3, ">")
save(exc_model1_larger, file = "Data/5Graph_model1_alpha1_excursions.RData")
#### Plotting the excursions ####
exc_model1_larger <- exc_model1_larger[[1]]
plot_excursions <- function(exc, graph, file_prefix) {
library(ggplot2)
library(scico)
library(MetricGraph)
library(excursions)
#replace all NA with 0
exc$F <- replace_na(exc$F, 0)
p1 <- graph$plot_function(exc$F, vertex_size = 0, edge_width = 0.1) + labs(color = "F")+ theme_minimal()
png(paste0("Figures/", file_prefix, "_F.png"), width = 3 * 700, height = 3 * 900, res = 300)
print(p1)
dev.off()
p2 = graph$plot_function(exc$E, vertex_size = 0, edge_width = 0.1) + labs(title = "Excursion set",color = "E")
png(paste0("Figures/",file_prefix, "_E.png"), width = 3*700, height = 3*500, res = 300)
print(p2)
dev.off()
p3 = graph$plot_function(exc$M, vertex_size = 0, edge_width = 0.1,
scale_color = scale_color_scico(palette = "vik", midpoint = 0)) + labs(title = "Contour avoiding set",color = "M")
png(paste0("Figures/", file_prefix, "_M.png"), width = 3*700, height = 3*500, res = 300)
print(p3)
dev.off()
p4 <- graph$plot_function(exc$rho, vertex_size = 0, edge_width = 0.1) +
labs(title = "Marginal excursion probabilities", color = "rho") + theme_minimal()
png(paste0("Figures/", file_prefix, "_rho.png"), width = 3 * 700, height = 3 * 900, res = 300)
print(p4)
dev.off()
library(viridis)
png(paste0("Figures/", file_prefix, "_rho2_.png"), height = 3 * 700, width = 3 * 900, res = 300)
p4_2 <- graph$plot_function(exc$rho, vertex_size = 0, edge_width = 0.1) +
scale_color_viridis(option = "C", direction = 1) +
labs(title = "Marginal Excursion Probabilities", color = "rho")+ theme_minimal()
print(p4_2)
dev.off()
p5 <- graph$plot_function(exc$mean,
vertex_size = 0, edge_width = 0.1,
scale_color = scale_color_scico(palette = "vik", midpoint = 0)
) + labs(title = "Posterior mean", color = "Mean")+ theme_minimal()
png(paste0("Figures/", file_prefix, "_mean.png"), width = 3 * 700, height = 3 * 900, res = 300)
print(p5)
dev.off()
p6 <- graph$plot_function(exc$vars,
vertex_size = 0, edge_width = 0.1,
scale_color = scale_color_scico(palette = "vik", midpoint = 0)
) + labs(title = "Marginal variance", color = "Variance")+ theme_minimal()
png(paste0("Figures/", file_prefix, "_vars.png"), width = 3 * 700, height = 3 * 900, res = 300)
print(p6)
dev.off()
}
library(qs)
plot_excursions(exc_model1_larger, graph, "5Excursions_model2_alpha1")Marginal excursion probabilities for Model 2 are shown in the figure below:

The excursion set for Model 2 is shown below:

The code to plot the figure above:
library(ggplot2)
library(MetricGraph)
library(excursions)
library(viridis)
library(tidyr)
library(ggmagnify)
library(RColorBrewer)
# Plot with adjusted color scale
p5 <- graph$plot_function(exc$F, vertex_size = 0, edge_width = 0.3) +
scale_color_gradientn(
colors = brewer.pal(9, "YlOrRd"), # Use the YlOrRd palette
limits = c(0.7, 1), # Set desired range
na.value = "grey80" # Optional: handle any remaining NA values
) +
theme_minimal()
p5
final <- p5 +
geom_magnify(
from = c(49.56, 49.58, 25.42, 25.45), # Smaller square for 4x magnification
to = c(49.705, 49.8, 25.45, 25.58), # Expanded view coordinates for larger magnification
colour = "red",
linewidth = 1, # Slightly thicker border
proj.fill = alpha("red", 0.1),# Increased opacity for fill
)
final
The code to plot the figure(same as Figure 6 in paper) above:
library(ggplot2)
library(MetricGraph)
library(excursions)
library(viridis)
library(tidyr)
library(ggmagnify)
library(RColorBrewer)
# Plot with adjusted color scale
p5 <- graph$plot_function(exc$F, vertex_size = 0, edge_width = 0.3) +
scale_color_gradientn(
colors = brewer.pal(9, "YlOrRd"), # Use the YlOrRd palette
limits = c(0.7, 1), # Set desired range
na.value = "grey80" # Optional: handle any remaining NA values
) +
theme_minimal()
p5
# 2. Zoomed-in plot (main focus) #can replot with thicker lines in general
zoomed_plot <- p5 +
theme(panel.grid = element_blank()) + # Remove all grid lines
coord_cartesian(
xlim = c(49.542, 49.62), # Align with your first image's longitude range
ylim = c(25.36, 25.441) # Align with your first image's latitude range
) +
theme(
panel.background = element_rect(fill = "white"), # Ensure no transparent background
plot.margin = margin(5, 5, 5, 5)
) +labs(color = "")
# 3. Full map (for inset) - Simplify the theme
full_map <- p5 +
theme_void() + # Remove axes, labels, background
theme(
panel.background = element_rect(fill = "white", colour = "black"), # White background + border
legend.position = "none", # Remove legend
panel.border = element_rect(colour = "black", fill = NA, linewidth = 0.5)
) + # Add rectangle to show zoomed region on the full map
geom_rect(
aes(xmin = 49.56, xmax = 49.59, ymin = 25.41, ymax = 25.44),
fill = NA, colour ="red", linewidth = 0.5
)
# 4. Convert the full map to a grob
inset_grob <- ggplotGrob(full_map)
# 5. Combine zoomed plot with inset
reverse_plot <- zoomed_plot +
annotation_custom(
grob = inset_grob,
xmin = 49.590, # Right edge of zoomed plot (longitude)
xmax = 49.626, # Adjust to fit within xlim
ymin = 25.408, # Top edge of zoomed plot (latitude)
ymax = 25.44499 # Adjust to fit within ylim
)